B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Mesa, Arizona Building Permit Cost Calculator

Estimates permit cost in Mesa from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Building Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Valuation $0 to $8,333
Flat fee $220.00
$220.00
○Valuation $8,334 to $16,667
Flat fee $330.00
$330.00
○Valuation $16,668 to $24,999
Flat fee $440.00
$440.00
○Valuation $25,000 to $200,000
$500.00 base plus $6.00 x 250 = $2,000.00
$2,000.00
○Valuation $200,000.01 to $500,000
$1,550.00 base plus $9.00 x 250 = $3,800.00
$3,800.00
○Valuation $500,000.01 to $2,000,000
$4,250.00 base plus $6.00 x 250 = $5,750.00
$5,750.00
○Permit deposit, valuation under $25,000 (credited at issuance)
Flat fee $170.00
$170.00
○Permit deposit, valuation $25,000 to $200,000 (credited at issuance)
Flat fee $500.00
$500.00
○Additional plan review beyond the third submittal
Flat fee $120.00
$120.00
How this jurisdiction calculates the fee

Mesa prices a residential building permit from Total Valuation applied to the Residential Rate Table. Total Valuation is livable building area times the current ICC Construction Cost per square foot, plus non-livable area at 50 percent of that cost. A permit deposit is collected at application and credited toward the permit fee at issuance. Plan review beyond the third submittal is billed hourly.

Source: published fee schedule · Verified 10/1/2026

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Building Permit Fee, Residential Rate Table, total valuation $0 to $8,333
Flat fee $220.00
$220.00
○Building Permit Fee, Residential Rate Table, total valuation $8,334 to $16,667
Flat fee $330.00
$330.00
○Building Permit Fee, Residential Rate Table, total valuation $16,668 to $24,999
Flat fee $440.00
$440.00
○Building Permit Fee, Residential Rate Table, valuation $25,000 to $200,000: base plus $6.00 per $1,000 over $25,000
Flat fee $500.00
$500.00
○Residential permit deposit due at application, valuation less than $25,000
Flat fee $170.00
$170.00
How this jurisdiction calculates the fee

Mesa charges no flat deck fee. A deck is permitted as Miscellaneous Residential Construction (renovations, remodeling, improvements and accessory buildings), so the fee is driven entirely by project valuation: the applicant declares the valuation, the Plans Examiner verifies it, and the amount is read off the Residential Rate Table. A deck valued anywhere from $0 through $8,333 therefore costs $220.00, and the fee steps up by bracket from there. Every permit fee also carries a 4% technology improvement fee capped at $800, and a $170.00 deposit is collected at application for valuations under $25,000.

Source: published fee schedule · Verified 10/2/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Building Permit Fee, Residential Rate Table, total valuation $0 to $8,333
Flat fee $220.00
$220.00
○Building Permit Fee, Residential Rate Table, total valuation $8,334 to $16,667
Flat fee $330.00
$330.00
○Temporary Electrical Service, each
Flat fee $200.00
$200.00
○Residential permit deposit due at application, valuation less than $25,000
Flat fee $170.00
$170.00
How this jurisdiction calculates the fee

Mesa has no flat residential electrical permit fee. Electrical work that is not part of a larger building permit is issued as a Stand Alone permit, and the fee is calculated by applying the valuation (declared by the applicant, verified by the Plans Examiner) to the Residential Rate Table. Where electrical work is included in a building permit, the Residential Rate Table fee already covers the plumbing, mechanical and electrical work rolled into the valuation of construction, so no separate electrical fee is charged. A handful of flat electrical charges do exist, notably temporary electrical service. Every permit fee also carries a 4% technology improvement fee capped at $800.

Source: published fee schedule · Verified 9/30/2026

Fence Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Valuation $0 to $8,333
Flat fee $220.00
$220.00
○Valuation $8,334 to $16,667
Flat fee $330.00
$330.00
○Valuation $16,668 to $24,999
Flat fee $440.00
$440.00
○Permit deposit, valuation under $25,000 (credited at issuance)
Flat fee $170.00
$170.00
○Desert Uplands Temporary Residential Fence Permit (district-specific, not the general fence fee)
Flat fee $120.00
$120.00
How this jurisdiction calculates the fee

Mesa publishes no general fence permit line item. A fence requiring a permit is handled as Miscellaneous Residential Construction, where the Building Permit Fee is the Total Valuation applied to the Residential Rate Table. Note that the $120.00 Fence Permit printed in the miscellaneous fee list is the Desert Uplands Temporary Residential Fence Permit, a district-specific permit, and does not apply to fences generally.

Source: published fee schedule · Verified 11/13/2026

Reroof Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Building Permit Fee, Residential Rate Table, total valuation $0 to $8,333
Flat fee $220.00
$220.00
○Building Permit Fee, Residential Rate Table, total valuation $8,334 to $16,667
Flat fee $330.00
$330.00
○Building Permit Fee, Residential Rate Table, total valuation $16,668 to $24,999
Flat fee $440.00
$440.00
○Residential permit deposit due at application, valuation less than $25,000
Flat fee $170.00
$170.00
How this jurisdiction calculates the fee

Mesa publishes no flat reroof fee. Replacing a roof covering is exempt from permit as long as the new covering is rated at least as high as the classification of the roofing it replaces, so most residential reroofs are free. A reroof that does require a permit is priced as Miscellaneous Residential Construction (renovation or remodeling): the valuation is declared by the applicant and verified by the Plans Examiner, then applied to the Residential Rate Table. Every permit fee also carries a 4% technology improvement fee capped at $800, plus Transaction Privilege (Sales) Tax where applicable.

Source: published fee schedule · Verified 10/29/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Building Permit Fee, Residential Rate Table, total valuation $0 to $8,333
Flat fee $220.00
$220.00
○Building Permit Fee, Residential Rate Table, total valuation $8,334 to $16,667
Flat fee $330.00
$330.00
○Building Permit Fee, Residential Rate Table, total valuation $16,668 to $24,999
Flat fee $440.00
$440.00
○Residential permit deposit due at application, valuation less than $25,000
Flat fee $170.00
$170.00
How this jurisdiction calculates the fee

Mesa sets no flat retaining-wall fee. A retaining wall of 4 feet or less measured from the base of the footing to the top of the wall is exempt from permit when none of the disqualifiers apply. A wall that does need a permit is priced as Miscellaneous Residential Construction: the valuation is declared by the applicant and verified by the Plans Examiner, then applied to the Residential Rate Table. Every permit fee also carries a 4% technology improvement fee capped at $800, plus Transaction Privilege (Sales) Tax where applicable.

Source: published fee schedule · Verified 10/29/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Building Permit Fee, Residential Rate Table, total valuation $0 to $8,333
Flat fee $220.00
$220.00
○Building Permit Fee, Residential Rate Table, total valuation $8,334 to $16,667
Flat fee $330.00
$330.00
○Building Permit Fee, Residential Rate Table, total valuation $16,668 to $24,999
Flat fee $440.00
$440.00
○Residential permit deposit due at application, valuation less than $25,000
Flat fee $170.00
$170.00
How this jurisdiction calculates the fee

Mesa publishes no flat shed fee. A detached accessory building such as a shed or playhouse under 200 square feet with no electrical, mechanical or plumbing service is exempt from permit and costs nothing. A shed that exceeds 200 square feet or that gets utilities is permitted as Miscellaneous Residential Construction (accessory buildings), priced by applying the applicant-declared valuation, verified by the Plans Examiner, to the Residential Rate Table. Every permit fee also carries a 4% technology improvement fee capped at $800, plus Transaction Privilege (Sales) Tax where applicable.

Source: published fee schedule · Verified 11/13/2026

Water Heater Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Building Permit Fee, Residential Rate Table, total valuation $0 to $8,333
Flat fee $220.00
$220.00
○Residential permit deposit due at application, valuation less than $25,000
Flat fee $170.00
$170.00
How this jurisdiction calculates the fee

Mesa publishes no flat water-heater permit fee. A like-for-like residential water heater replacement of equal or lesser rating requires no permit at all. When a permit is required (for example an upsize, a relocation, or a fuel-type change), the work is issued as a Stand Alone plumbing permit, and the fee is set by applying the valuation declared by the applicant and verified by the Plans Examiner to the Residential Rate Table, so a typical water heater lands in the lowest bracket. Every permit fee also carries a 4% technology improvement fee capped at $800, and a $170.00 permit deposit is collected at application for valuations under $25,000.

Source: published fee schedule · Verified 10/29/2026

See the full write-up: Mesa building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.