B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Miscellaneous Materials

3902Form Coating Material

MN · 2025 Standard Specifications✓ Full text on BuildSpecBook pages 1078–0 Save this section

Ask about Section 3902

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

3902.1SCOPE

Provide form coating Material that will prevent bonding between a form, dowel, or other object and concrete.

3902.2REQUIREMENTS

Provide form coating Material listed on the APL and meeting the following requirements:

(1)Made of a chemical release agent that does not contain ordinary lubrication oil,

conventional form oil, fuel oil, or kerosene, and has a flash point of at least 149 °F when tested in accordance with ASTM D92, Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

(2)Prevents bonding to concrete
(3)Does not penetrate, stain, or leave a residual film on the concrete surface
(4)Does not attract dirt or other deleterious matter

Apply the form coating Material at a rate recommended by the manufacturer to provide a smooth surface free of dusting action caused by reactions of the chemical release agent. As a substitute for a form coating Material listed on the APL, the Contractor may provide epoxy coated dowel bars utilized in dowel bar baskets and dowel bar retrofits (DBR) coated with a factory applied, Department-approved petroleum, paraffin based lubricant with a manufacturer stated use as a bond breaker.

3902.3SAMPLING AND TESTING — BLANK

Get an email when 3902 changes

Minnesota revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Minnesota Standard Specifications for Construction, 2025 Edition. Pages 1078–0 of 1,081. View official source ↗

Ask about this section

Scoped to Minnesota 2025 Standard Specifications for Construction, Section 3902 — Form Coating Material. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.