B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Taylorsville, Utah Building Permit Cost Calculator

Estimates permit cost in Taylorsville from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Building Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Valuation under $2,000
$24.00 for the first $500.00, plus 2,495 x $3.50 for $249,500.00 over (rounded up per "or fraction thereof") = $8,756.50
$8,756.50
○Valuation $2,000 to $25,000
$76.50 for the first $2,000.00, plus 248 x $16.50 for $248,000.00 over (rounded up per "or fraction thereof") = $4,168.50
$4,168.50
○Valuation $25,000 to $50,000
$456.00 for the first $25,000.00, plus 225 x $12.00 for $225,000.00 over (rounded up per "or fraction thereof") = $3,156.00
$3,156.00
○Valuation $50,000 to $100,000
$765.00 for the first $50,000.00, plus 200 x $8.50 for $200,000.00 over (rounded up per "or fraction thereof") = $2,465.00
$2,465.00
○Valuation $100,000 to $500,000
$1,181.00 for the first $100,000.00, plus 150 x $6.50 for $150,000.00 over (rounded up per "or fraction thereof") = $2,156.00
$2,156.00
○Valuation $500,000 to $1,000,000
$250,000.00 is within the first $500,000.00, so the base $3,781.00 applies
$3,781.00
○Valuation over $1,000,000
$250,000.00 is within the first $1,000,000.00, so the base $6,531.00 applies
$6,531.00
○Residential valuation - main floor / second floor
$88.03 x 2,000 = $176,060.00
$176,060.00
○Residential valuation - rough basement
$36.50 x 2,000 = $73,000.00
$73,000.00
○Residential valuation - finished basement
$15.00 x 2,000 = $30,000.00
$30,000.00
○Residential valuation - converted garage/carport living space
$45.00 x 2,000 = $90,000.00
$90,000.00
○Manufactured home setup
Flat fee $300.00
$300.00
○Temporary structures
Flat fee $150.00
$150.00
○Land disturbance application
Flat fee $100.00
$100.00
○Demolition
Flat fee $60.00
$60.00
How this jurisdiction calculates the fee

Permit fee is set from a tiered table applied to the total construction valuation of the job. Taylorsville publishes its own per-square-foot construction values used to compute that valuation for residential work.

Source: published fee schedule · Verified 9/15/2026

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Residential valuation - deck
$20.00 x 2,000 = $40,000.00
$40,000.00
○Residential valuation - carport/covered deck
$25.00 x 2,000 = $50,000.00
$50,000.00
How this jurisdiction calculates the fee

Decks are not given a flat fee. The Consolidated Fee Schedule assigns a per-square-foot construction value to deck and covered deck area; that value is run through the tiered valuation-based building permit fee table.

Source: published fee schedule · Verified 9/15/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Electrical service charge
Flat fee $60.00
$60.00
○Temporary power
Flat fee $60.00
$60.00
How this jurisdiction calculates the fee

Common residential electrical work is charged as a flat permit fee on the Consolidated Fee Schedule rather than by valuation.

Source: published fee schedule · Verified 9/15/2026

Fence Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Fences
Flat fee $60.00
$60.00
How this jurisdiction calculates the fee

Fences are a flat-fee permit on the Consolidated Fee Schedule.

Source: published fee schedule · Verified 9/15/2026

Reroof Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Roofing
Flat fee $60.00
$60.00
○Exterior coverings
Flat fee $60.00
$60.00
○Replacing windows & doors
Flat fee $60.00
$60.00
How this jurisdiction calculates the fee

Roofing is a flat-fee residential permit on the Consolidated Fee Schedule. Related exterior work is listed at the same flat rate.

Source: published fee schedule · Verified 9/15/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

How this jurisdiction calculates the fee

No flat retaining wall fee is printed on the Consolidated Fee Schedule; the permit is priced from the tiered valuation-based building permit fee table using the construction valuation of the wall.

Source: published fee schedule · Verified 8/3/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Residential valuation - garage/shed
$34.18 x 2,000 = $68,360.00
$68,360.00
How this jurisdiction calculates the fee

Sheds and detached garages are priced by valuation. The Consolidated Fee Schedule publishes a per-square-foot construction value for garage/shed space, which is run through the tiered valuation-based building permit fee table.

Source: published fee schedule · Verified 9/15/2026

Water Heater Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Hot water heater
Flat fee $60.00
$60.00
○HVAC
Flat fee $60.00
$60.00
○Gas line
Flat fee $60.00
$60.00
How this jurisdiction calculates the fee

Water heater replacement is a flat-fee residential permit on the Consolidated Fee Schedule. Related mechanical and gas work is listed at the same flat rate.

Source: published fee schedule · Verified 9/15/2026

See the full write-up: Taylorsville building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.