1737MODIFY SPREAD SPECTRUM WIRELESS RADIO

Pay Item Pay Unit 900MHz Serial Spread Spectrum Radio Each 900MHz Serial/Ethernet Spread Spectrum Radio Each

MODIFY SPREAD SPECTRUM WIRELESS RADIO -1 DESCRIPTION Make modifications to existing Spread Spectrum Radio installations . -2 MATERIAL Refer to Division 10. Item Section Pole Line Hardware 1098 -7 Retroreflective Sheeting 1092 -2 Signs and Hardware 1092 -1 Spread Spectrum Radio 1098 -19 Wire 1091 -2 Furnish material, equipment and hardware under this section that is pre -approved on the ITS and Signals QPL available on the Department’s website. -3 CONSTRUCTION METHODS This item of wor k involves making modifications to existing wireless installations which include relocating an existing radio from an existing cabinet to a new cabinet, and/or relocating existing components of the radio system from an existing pole to new poles (wood poles, metal strain poles, metal poles with mast arms, etc.). This item of work includes, but may not be limited to, the following:

This item of work may also involve converting an existing standalone radio site to a repeater site. This item of work includes, but may not be limited to, the following:

-4 MEASUR EMENT AND PAYMENT Modify Radio Installation will be measured as the actual number of modified radio installations that are modified and accepted . This item includes relocating the radio, and furnishing and/or relocating and installing coaxial cable, N -Type Connectors, coaxial cable shield grounding kits, antenna mounting hardware, antennas, coaxial cable and power dividers. T his item of work may also involve furnishing and