For gro und mounting, furnish steel, 3- lb, U-channel posts with hardware for ground mounting. Comply with Section 903. For mast -arm mounting, furnish rigid aluminum, galvanized steel or stainless steel sign mounting brackets. 1745 -3 CONSTRUCTION METHODS Install signs with applicable mounting hardware. Comply with sign offsets and mounting heights as shown in the MUTC D and the Roadway Standard Drawings . For messenger cable mounting, install signs 6 inches minimum from signal heads. For ground mounting, comply with Article 903- 3. For mast arm mounting, install attachment brackets to allow adjustment so signs:
1745 -4 MEASUREMENT AND PAYMENT Sign for Signals will be measured and paid as the actual number of signs for signals, regardless of mounting method, furnished, installed and accepted. Payment will be made under: Pay Item Pay Unit Sign for Signals Each
RELOCATE EXISTING SIGN 1746 -1 DESCRIPTION Relocate existing signs. 1746 -2 CONSTRUCTION METHODS As directed by the plans, relocate existing signs. Comply with Article 1745 -3. 1746 -3 MEASUREMENT AND PAYMENT Relocate Existing Sign will be measured and paid as the a ctual number of existing signs, regardless of mounting method, relocated and accepted. Payment will be made under: Pay Item Pay Unit Relocate Existing Sign Each
LED BLANKOUT SIGN -1 DESCRIPTION Furnish and install Light Emitting Diode (LED) blankout signs with all necessary hardware as set forth in the plans and specifications. Fabricate the sign such that the legend elements, text size, font type, and overall size of the sign comply with the applicable provisions for the static version of t he sign conforming to the MUTCD .