211Culvert Cleaning

WY · 2021 Standard Specifications✓ Full text on BuildSpecBook pages 185–0 Save this section

Ask about Section 211

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

Culvert Cleaning

211.1DESCRIPTION

1 This section describes the requirements for removing, hauling, and disposing of debris, silt, and obstructions from existing culverts.

211.2MATERIALS—V acant

211.3EQUIPMENT—V acant

211.4CONSTRUCTION

1 Unplug and flush clean existing culverts as specified. Dispose of material removed at a contractor-furnished site.

2 Do not damage culverts, appurtenances, or property or create a public hazard or nuisance. If damage occurs, repair in accordance with Subsection 107.8, Protection and Restoration of Property, Markers, and Landscape.

211.5MEASUREMENT and PAYMENT

1 The engineer will measure Culvert Cleaning by the each.

2 The department will pay as follows:

Pay Item

Pay Unit Measure to the Nearest Pay to the Nearest Culvert Cleaning EA [Ea] EA [Ea] EA [Ea]

Referenced in this section

107Legal Relations and Responsibility to the Public

Get an email when 211 changes

Wyoming revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Wyoming Standard Specifications for Road and Bridge Construction, 2021 Edition. Pages 185–0 of 771. View official source ↗

← Previous

210 Equipment Work

212 Structure Excavation and Backfill

Ask about this section

Scoped to Wyoming WYDOT Standard Specifications for Road & Bridge Construction, Section 211 — Culvert Cleaning. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.