1046END WELDED STUDS

NE · 2017 Standard Specifications✓ Full text on BuildSpecBook pages 918–918 Save this section

Ask about Section 1046

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

- 884 - SECTION 1046 -- END WELDED STUDS

1046.01 Description

1.End welded studs shall conform to the requirements of the AWS Standard Specifications. - 885 - SECTION 1047 -- WELDING ELECTRODES AND FLUXES

1047.01 Description

1.All welding electrodes and fluxes shall conform to the requirements of the American Welding Societ y (AWS) Standard Specifications.

1047.02 Material Characteristics

1.Shielded metal-arc welding electrodes shall conform to AWS Specifications for Mild Steel Covered Arc-Welding Electrodes.

2.Submerged-arc welding electrodes and flux shall conform to AWS Specifications for Bare Mild Steel Electrodes and Fluxes for Submerged-Arc Welding.

3.Gas metal-arc welding electrodes shall conform to AWS specifications for Mild Steel Electrodes for Gas Metal-Arc Welding.

4.Flux-cored arc welding electrodes shall conform to AWS specifications for Mild Steel Electrodes for Flux-Cored Arc Welding.

Sections that cite this one

708STEEL STRUCTURES

Get an email when 1046 changes

Nebraska revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Nebraska Standard Specifications for Highway Construction, 2017 Edition. Pages 918–918 of 1,048. View official source ↗

← Previous

1045 STRUCTURAL STEEL

1047 WELDING ELECTRODES AND FLUXES

Ask about this section

Scoped to Nebraska Standard Specifications for Highway Construction, Section 1046 — END WELDED STUDS. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.