1053SHEET ZINC

NE · 2017 Standard Specifications✓ Full text on BuildSpecBook pages 925–925 Save this section

Ask about Section 1053

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

- 891 - SECTION 1053 -- SHEET ZINC

1053.01 Description

1.Sheet zinc shall conform to the requirements of ASTM B 69, Type II. Zinc sheet shall be at least 24 ga uge [0.028 inch (0.70 mm)] thick.

1053.02 Acceptance Requirements

1.Sheet zinc will be accepted based on the requirements of this Section and a manufacturer's certificat e of compliance indicating compliance with the requirement in this Section. - 892 - SECTION 1054 -- SHEET ALUMINUM

1054.01 Description

1.Sheet aluminum shall confor m to the requirements of ASTM B 209M, alloy 5052-H38. Aluminum sheet sh all be at least 0.03 inch (0.75 mm) thick.

1054.02 Acceptance Requirements

1.Sheet aluminum will be accepted based on the requirements of this Section and a manufacturer's certificat e of compliance indicating compliance with the requirements in this Section.

Get an email when 1053 changes

Nebraska revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Nebraska Standard Specifications for Highway Construction, 2017 Edition. Pages 925–925 of 1,048. View official source ↗

← Previous

1052 GALVANIZED SHEET METAL

1054 SHEET ALUMINUM

Ask about this section

Scoped to Nebraska Standard Specifications for Highway Construction, Section 1053 — SHEET ZINC. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.