701.01 701.02 701.04 701.05 701.07 701.09 701.15 Cement, Hydraulic ASTM Types I, IA, II, III,IL, Masonry Type IS(<25) Verify manufacturer on Concrete Plant Batch Ticket is on Certified List for Supplement 1028 maintained by OMM. Verify material against bill of lading description. Document in AWP.
701.10 Micro-Silica Verify manufacturer on Concrete Plant
Batch Ticket is on Certified List for S 1045 maintained by OMM. Verify material against bill of lading description. Document in AWP.
701.11 Slag Cement Verify manufacturer on Concrete Plant
Batch Ticket is on Certified List for S 1034 maintained by OMM. Spec No. Material Material only Inspection or Sampling Requirements Additional Instructions Verify material against bill of lading description. Document in AWP.
701.13 Fly Ash/Natural
Pozzolan Verify manufacturer on Concrete Plant Batch Ticket is on Certified List for S 1026 maintained by OMM. Verify material against bill of lading description. Document in AWP If high LOI fly ash verify manufacturer on Concrete Plant Batch Ticket is on List for S 1115.
701.15 Portland-
limestone Cement, Type IL Verify manufacturer on Concrete Plant Batch Ticket is on Certified List for Supplement 1028 maintained by OMM. Verify material against bill of lading description. Document in AWP.
702.01 Asphalt Binder Certified asphalt PG binder: As
directed by OMM. Plant: Minimum of one sample per project per season, except for inconsequential quantities for each PG grade used. Non-Certified PG binder:Sample and Approve by OMM before use. Certified binder: Plant: Submit sample to OMM. Non-certified binder: Submit to OMM. Do not allow asphalt production until material is approved. 702.02 702.03 702.04 702.07 702.12 702.13 Cut Back Asphalt Cut Back Asphalt Emulsions Emulsified Asphalts Asphalt Emulsion MWS Non-Tracking Asphalt Emulsion SBR Asphalt Emulsion Certified material: At the refinery or source as directed by OMM. Project and/ or Plant: One sample per each 25,000 gallons. None for less than 300 gallons.. Non-certified material: Will be sampled and approved by OMM before use.
702.13 Provide Certified Test Data
per specification requirements. Certified material: Submit to OMM. Non-certified material: Submit to OMM. Do not use until approved. 702.05 702.06 Asphalt Primer Waterproofing Asphalt Waterproofing Verify type and brand name of material is on QPL at the time of use. Document in AWP. If rejecting material because material non-performs or looks defective during use, notify District Testing and OMM Asphalt section. Spec No. Material Material only Inspection or Sampling Requirements Additional Instructions
702.08 Cold Liquid-
Applied Elastomeric Waterproofing Membrane Provide Certified Test Data per specification requirements.
702.16 Polymer
Emulsified Binder Type A: Certified Material. At the refinery or source as directed by OMM. At project sample per 422.10 (once per day). Non-certified material is sampled and approved by OMM before use. Type B: Certified test data Type C: Certified Material. At the refinery or source as directed by OMM. At project sample per 421.12.A (once per day). Type A and C: Certified material: Submit to OMM. Non-certified material: Submit to OMM. Do not use until approved.
702.17 Crack Sealant Material is pre-tested and approved.
Will be shipped with DSR. Document in AWP. Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM Asphalt section. Type 1 Type II Provide fibers listed on the QPL. Provide PG64-22 conforming to 702.01. Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM Asphalt section. Type III Provide fibers listed on the QPL. Provide PG64-22 conforming to 702.01. Type IV Provide materials listed on the QPL. Type V Provide materials listed on the QPL. 703.02 703.04 703.05 703.08 Coarse Aggregate Coarse Aggregate will have current certification for use, and be supplied by a S1069 Pre-Qualified Producer/Supplier. Verify material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. Document in AWP. 60 to 75 lb. QA samples are taken by District Testing at each Pre-Qualified source a minimum of one (1) time per year. Sample at the project on an as needed basis to address material problems or risks associated with quality or gradation. 703.02 703.03 703.04 Fine Aggregate Fine Aggregate will have current certification for use, and be supplied by a S1069 Pre-Qualified 30 to 40 lb. QA samples are taken by District Testing at each Pre-Qualified source a Spec No. Material Material only Inspection or Sampling Requirements Additional Instructions 703.05 703.06 703.10 Producer/Supplier. Verify material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. Document in AWP. minimum of one (1) time per year. Sample at the project on an as needed basis to address material problems or risks associated with quality or gradation. 703.02 703.04 703.05 Dense Graded Aggregate Dense Graded Aggregate will have current certification for use, and be supplied by a S1069 Pre-Qualified Producer/Supplier. Verify material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. Document in AWP. 90 to 100 lb. QA samples are taken by District Testing at each Pre-Qualified source a minimum of one (1) time per year. Sample at the project on an as needed basis to address material problems or risks associated with quality or gradation.
703.07 Materials Mineral
filler Limestone Dust will be supplied by a S1069 Pre-Qualified Producer/Supplier. Verify Pre- Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. For Portland cement assure source is on Certified list for S 1028 . For inert mineral filler sample for gradation. Submit to District Testing. 703.11 Type 1 Type 2 Type 3 Structural Backfill for 611 Bedding and Backfill All 703.11 (Type 1, 2, & 3) shall be provided by a S1069 Pre-Qualified Producer/Supplier. Verify material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. Document in AWP. 40-100lb (depending on coarse, fine, or dense grade) QA samples are taken by District Testing at each Pre- Qualified source a minimum of one (1) time per year. Sample at the project on an as needed basis to address material problems or risks associated with quality or gradation.
703.13 Coarse Aggregate
for Items 451 and All materials shall be provided by a S1069 Pre-Qualified Producer/Supplier. Verify material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report 240-300 lb QA (Freeze Thaw/Quality) samples are taken by District Testing once (1) every 2 to 4 years depending on certification and submitted to OMM for testing (this is additional to Spec No. Material Material only Inspection or Sampling Requirements Additional Instructions for that source or district. Document in AWP. standard coarse aggregate testing). Sample at the project on an as needed basis to address material problems or risks associated with quality or gradation.
703.14 Steel Slag
Aggregate for Non-Pavement Use All materials shall be provided by a S1069 Pre-Qualified Producer Supplier. Stockpile and sample each 2500 tons (2300 metric tons). Notify the District laboratory for inspection of sources and to obtain split samples. Test for expansion. Document in AWP. Steel Slag less than 10 yrs old requires X-Ray Fluorescence for total percent MgO, and X-Ray Diffraction for total percent periclase. Sample at the project on an as needed basis to address material problems or risks associated with quality or gradation.
703.16 Suitable
Materials for Embankment Construction All materials shall be provided by a S1069 Pre-Qualified Producer/Supplier. Multiple aggregate types available. Follow the requirements of the individual material specification. Verify material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. Document in AWP. Sample at the project on an as needed basis to address material problems or risks associated with quality or gradation.
703.17 Dense Graded
Aggregate for Item 304 All materials shall be provided by a S1069 Pre-Qualified Producer/Supplier. Verify the material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. 90 to 100 lb. QA sample taken by District Testing at each source a minimum of
1.time per year. Sample at the project on an as needed basis to address material problems or risks associated with quality or gradation.
703.18 Aggregate for
Items 410, 411, and 617 All materials shall be provided by a S1069 Pre-Qualified Producer/Supplier. Verify the material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. 90 to 100 lb. QA sample taken by District Testing at each source a minimum of
1.time per year. Sample at the project on an as needed basis to address material problems or risks Spec No. Material Material only Inspection or Sampling Requirements Additional Instructions associated with quality or gradation.
703.19 A Crushed
Aggregate Slope Protection and Filter Aggregate for Dump Rock Fill All materials shall be provided by a S1069 Pre-Qualified Producer/Supplier. Verify the material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. Sample and/or photograph with a scale for sizing on an as needed basis to address material problems or risks associated with quality or gradation.
703.19 B Dumped Rock
Fill and Rock Channel Protection All materials shall be provided by a S1069 Pre-Qualified Producer/Supplier. Verify the material certification, and Pre-Qualified status by checking AWP or by using the CMRS portal and generating a report for that source or district. Sample and/or photograph with a scale for sizing on an as needed basis to address material problems or risks associated with quality or gradation.
Referenced in this section
Get an email when 701 changes
Ohio revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.
Source: Construction and Material Specifications, 2023 (rev. 7/17/2026) Edition. Pages 655–660 of 892. View official source ↗