8−170 Bearings," "Disc Bearings," and "Sliding Bearings " will be measured by the number of each type of bearing actually installed in accordance with the Plans and/or as directed by the Engineer.
828.05 BASIS OF PAYMENT. The accepted quantities of "Elastomeric Bearings," both plain and
reinforced, "Pot Bearings," "Disc Bearings," and "Sliding Bearings" will be paid for at their respective contract unit prices per each such bearing as listed in the Proposal. The prices so-stated constitute full and complete compensation for all labor, materials, and equipment, including testing, services of the manufacturer's representative, when required, bedding pads, anchor bolts, and all incidentals required to finish the work, complete and accepted by the Engineer. SECTION 829 BRIDGE SCUPPER PIPING
829.01 DESCRIPTION. This work consists of providing polyvinyl chloride scupper piping on
bridges at the locations indicated on the Plans, or as directed by the Engineer, all in accordance with these Specifications. 829.02 MATERIALS. 829.02.1 Polyvinyl Chloride Scupper Piping.
a.Pipe shall conform to the requirements of ASTM D 1785; PVC 1120; Schedule 80. Solvent cement fittings shall conform to the requirements of ASTM D 2467; Schedule 80.
b.Hardware. Straps, angles, etc, shall conform to the requirements of SECTION M.05; METALS , and shall be galvanized in accordance with AASHTO M111.
c.Manufacturer's Certification. The Contractor shall furnish the manufacturer's certification that the materials provided meet specification requirements. 829.03 CONSTRUCTION METHODS. 829.03.1 Polyvinyl Chloride Scupper Piping.
a.Field Measurements. The Contractor shall make all appropriate field measurements and evaluate special conditions for installation prior to the preparation of shop drawings.
b.Shop Drawings. The Contractor shall submit shop drawings of the pipe assembly in accordance with Subsection 105.02 of these Specifications.
c.Handling. Special care shall be taken during handling and storage to avoid damage to
Source: Rhode Island Standard Specifications (Bluebook), 2024 Edition. Pages 504–504 of 826.