Trash Guards
619.1DESCRIPTION
1 This section describes the requirements for furnishing and installing trash guards.
619.2MATERIALS
1 Provide materials in accordance with the following: Material Subsection Bolts and Fasteners 815.6 Structural Steel 815.1 Paint 809
619.3EQUIPMENT—V acant
619.4CONSTRUCTION
1 Fabricate in accordance with Section 501, Structural Steel, with the exception that they may be fabricated at the site. The department does not require shop inspection or drawings. 2 Clean and paint trash guards and brackets in accordance with the relevant portions of Subsection 501.4.1.24, Painting, or Subsection 501.4.2.8, Field Painting. Required coats may be applied in the shop or field. Use brown for the final coat. 3 Fasten trash guards to the pipe as specified. When required, the department will provide padlocks for the locking bar.
619.5MEASUREMENT and PAYMENT
1 The engineer will measure Trash Guard by the each, for each type installed. 2 The department will pay as follows: Pay Item Pay Unit Measure to the Nearest Pay to the Nearest Trash Guard ____ EA [Ea] EA [Ea] EA [Ea]
Get an email when 619 changes
Wyoming revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.