3332.1SCOPE
Provide sheet copper.
3332.2REQUIREMENTS
Provide sheet copper meeting the requirements of ASTM B152, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar, for any type of copper with a total copper and silver content at least 99.9 percent, and the following:
(1)Provide a light cold-rolled temper
(2)The Structural Metals Engineer will waive the requirements for resistivity and
embrittlement tests
(3)Ensure the copper sheet withstands the bend test by cold-bending the sheet through an
angle of 180 degrees flat upon itself without fractures on the outside of the bend portion
3332.3SAMPLING AND TESTING — BLANK
Get an email when 3332 changes
Minnesota revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.
Source: Minnesota Standard Specifications for Construction, 2025 Edition. Pages 921–0 of 1,081. View official source ↗