3340.1SCOPE
Provide stainless steel clad plate.
3340.2REQUIREMENTS
Provide stainless steel clad plate meeting the requirements of ASTM A264, Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate, and this section. Provide Type 316L stainless steel cladding. Unless the Contract requires otherwise, provide a plate clad on one side with a Nominal thickness of 10 percent, at least 9 percent of the total plate thickness, or no greater than 1/2 inch of cladding. Provide cladding and base metal with a shear strength of at least 20,000 psi when tested in accordance with ASTM A264, Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate. Provide the clad surface of the plate with a sand blasted and pickled finish or a blast cleaned and pickled finish. Provide the plate in a heat-treated condition. Perform heat treatment so cladding develops maximum corrosion-resistant properties.
3340.3SAMPLING AND TESTING — BLANK
Get an email when 3340 changes
Minnesota revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.