3336Wrought and Extruded Aluminum

MN · 2025 Standard Specifications✓ Full text on BuildSpecBook pages 921–0 Save this section

Ask about Section 3336

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

3336.1SCOPE

Provide aluminum alloy for specified applications.

3336.2REQUIREMENTS

Provide aluminum alloy products meeting relevant requirements of the ASTM specifications listed in this section. Provide the alloy and temper for a specified application as required by the C ontract. Provide sheet and plate products meeting the requirements of ASTM B209, Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate.

Provide standard structural shapes, rolled or extruded, meeting the requirements of ASTM B308, Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles, Alloy 6061-T6. Provide pipe and tube products meeting the following requirements:

(1)Drawn, seamless tube in accordance with ASTM B210, Standard Specification for

Aluminum and Aluminum-Alloy Drawn Seamless Tubes

(2)Seamless pipe and seamless extruded tube in accordance with ASTM B241, Standard

Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube, Alloy 6061 or Alloy 6063.

(3)Extruded structural pipe in accordance with ASTM B429, Standard Specification for

Aluminum-Alloy Extruded Structural Pipe and Tube, Alloy 6061 or Alloy 6063. Provide sand castings meeting the requirements of ASTM B26, Standard Specification for Aluminum-Alloy Sand Castings, Alloy SG70A or Alloy S5B. Provide permanent mold castings meeting the requirements of ASTM B108, Standard Specification for Aluminum- Alloy Permanent Mold Castings, Alloy SG70A, Alloy SG70B, Alloy S5B, or Alloy S7A Provide other miscellaneous aluminum products as shown on the Plans or the Special Provisions.

3336.3SAMPLING AND TESTING — BLANK

Get an email when 3336 changes

Minnesota revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Minnesota Standard Specifications for Construction, 2025 Edition. Pages 921–0 of 1,081. View official source ↗

← Previous

3335 Sheet Lead

3340 Stainless Steel Clad Plate

Ask about this section

Scoped to Minnesota 2025 Standard Specifications for Construction, Section 3336 — Wrought and Extruded Aluminum. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.