3382Steel Plate Beams and Fittings for Traffic Barriers (Guardrail)

MN · 2025 Standard Specifications✓ Full text on BuildSpecBook pages 944–0 Save this section

Ask about Section 3382

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

3382.1SCOPE

Provide steel plate beams and fittings for use in guardrail construction.

3382.2REQUIREMENTS

Provide steel plate beams and fittings for guardrail construction meeting the requirements of AASHTO M 180 Standard Specification for Corrugated Sheet Steel Beams for Highway Guardrail for the type and class required by the Contract. Unless the Plans show otherwise, provide beams meeting the requirements for Class A, Type II (galvanized). Provide w-beam and thrie-beam rail elements, posts, blocks, soil plates, reducer sections, and end treatments that meet the requirements of Task Force 13 Guide to Standardized Highway Barrier Hardware.

3382.3SAMPLING AND TESTING

Triple-spot test galvanized beams and fittings.

Get an email when 3382 changes

Minnesota revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Minnesota Standard Specifications for Construction, 2025 Edition. Pages 944–0 of 1,081. View official source ↗

← Previous

3381 Wire Rope and Fittings for Cable Guardrail

3385 Anchor Rods

Ask about this section

Scoped to Minnesota 2025 Standard Specifications for Construction, Section 3382 — Steel Plate Beams and Fittings for Traffic Barriers (Guardrail). Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.