943.1DESCRIPTION—This work is the removal of existing flat sheet aluminum signs with stiffeners, steel
pipe supports, and associated hardware and resetting the existing flat sheet aluminum signs with stiffeners as indicated with new steel pipe supports, fastened to fabricated structural steel mounting brackets .
943.2MATERIAL—As specified in Section 933.2, except delete the first bullet.
943.3CONSTRUCTION—As shown on the Standard Drawings, as specified in Section 933.3, and as follows:
Remove existing signs, supports, anchors, and associated hardware as indicated. Stockpile signs for reuse. Dispose of existing anchors and associated hardware outside the right-of-way. If specified or indicated, store existing supports for Department pick up. Otherwise, dispose of existing supports outside the right of way. Provide new steel pipe support, fasteners, and fabricated structural steel mounting brackets to be set at the specified locations. Reset the existing signs. Avoid damage to existing signs during the removal and stockpiling operations. Replace signs lost or damaged as a result of the resetting operations, at no additional cost to the Department.
.4 MEASUREMENT AND PAYMENT—Each
Get an email when 943 changes
Pennsylvania revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.