B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
TRAFFIC ACCOMODATION AND CONTROL

934POST MOUNTED SIGNS, TYPE E

PA · 2026 Standard Specifications✓ Full text on BuildSpecBook pages 841–0 Save this section

Ask about Section 934

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

934.1DESCRIPTION —This work is the furnishing and installation of fabricated aluminum signs of type

indicated on wood posts or composite posts, including the removal of existing signs.

934.2MATERIAL—As shown on the Standard Drawings, and as follows:

(a)Extruded Aluminum Channel Signs, Posts, Supports, and Miscellaneous Material.

• Extruded Aluminum Channel Signs. Section 1103.02

• Treated Wood Posts. Section 1103.09(a)

• Composite Posts. Section 1103.09(b)

• Galvanized Steel Hex Head Bolts, Nuts, Lock-Washers; Aluminum Post-Clips, Auxiliary Supports for Exit Panels, Rivets. Section 1103.11

• Angles (Supports). Section 1103.12(g)

• Shim Bars and Plates (Supports). Section 1105.02(a)2

(b)Flat Sheet Aluminum Signs with Stiffeners, Posts, and Miscellaneous Material.

• Flat Sheet Aluminum Signs with Stiffeners. Section 1103.03

• Treated Wood Posts. Section 1103.09(a)

• Composite Posts. Section 1103.09(b)

• Rivets. Section 1103.11(e)

• Stainless Steel Bolts, Nuts, Washers, Post-Clips; Twist-In Toggles and Buckle Straps; Butting Plates; Auxiliary Supports for Exit Panels. Section 1103.11

• Angles (Support). Section 1103.12(g)

• Shim Bars and Plates (Supports). Section 1105.02(a)2

(c)Foundations.

• Class A Cement Concrete. Section 704

• Sleeves. Section 1105.02(j)1

• Steel Pipe. Section 1103.12(e)

934.3CONSTRUCTION—If indicated, remove existing signs.

(a)Wood Posts. Section 932.3
(b)Composite Posts. As shown on the Standard Drawings, as specified in Sections 930.3(a), (b), and

(e), Section 931.3(b), and as follows:

Excavate for the post foundation. Place the post in the sleeve in the excavated foundation. Set the sleeve, using the temporary framing to ensure proper location. Place foundation concrete against undisturbed earth, as specified in the applicable parts of Section 1001.3. Finish the foundation tops flush and in the same plane as the adjacent ground, except trowel the concrete surface and shape to prevent water standing against the posts. Drill or form the hole if posts are to be located in concrete such as divisors or islands. Place protective plastic cap over top end of post. Permanently scribe 1-inch numerals on back of sign indicating the month and year of installation.

934.4MEASUREMENT AND PAYMENT—Square Foot of sign

The unit price includes removal of existing signs.

Get an email when 934 changes

Pennsylvania revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Publication 408 Highway Construction Specifications, 2026 Edition. Pages 841–0 of 1,522. View official source ↗

Ask about this section

Scoped to Pennsylvania Publication 408 — Specifications, Section 934 — POST MOUNTED SIGNS, TYPE E. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.