B
HomeLibrariesCopilotSearchProjectsBookmarks
FeedbackHelp Desk
Libraries
Building Codes
Code LibraryIBC — BuildingIRC — ResidentialIFC — FireIPC — PlumbingIMC — MechanicalIFGC — Fuel GasIECC — EnergyNEC — ElectricalModel Codes
Specifications
CSI SpecificationsDOT SpecsTransit SpecsUSACE
Standards
TransportationRailroadFire SafetyAccessibilityStructural
Tools & References
DiagramsAssembliesProductsCalculatorsChecklistsPermits
PricingLog in
Traffic Control (900-999)

933POST MOUNTED SIGNS, TYPE D

PA · 2026 Standard SpecificationsBook pages 851855View official source ↗

941.1 941.4

941.1DESCRIPTION —This work is the removal of existing flat sheet signs, posts, anchors, and associated

hardware , and resetting the existing flat sheet signs as indicated with new posts, anchors, and associated hardware.

941.2MATERIAL —Section 931.2 , except delete the first bullet .

941.3CONSTRUCTION —As shown on the Standard Drawings , as specified in Section 930.3(a), (b), (d),

and (e) , and as follows: Remove existing signs, posts, anchors, and associated hardware as indicated. Stockpile signs for reuse. Dispose of existing anchors and associated hardware outside the right -of-way. If specified or indicated, store existing posts for Department pick up. Otherwise, d ispose of existing posts outside the right -of-way. Provide new breakaway steel posts, anchors, and associated hardware to be set at the specified locations. Reset the existing signs. Avoid damage to existing signs during the removal and stockpiling operations . Replace any sign lost or damaged as a result of any of the resetting operations, at no additional cost to the Department.

941.4MEASUREMENT AND PAYMENT —Each

942.1 942.4

942.1DESCRIPTION —This work is the removal of existing signs, wood posts, foundations, and associated

hardware and resetting the existing signs as indicated with new wood posts, foundations, and associated hardware.

942.2MATERIAL —Section 932.2(a), except delete the first bullet ; and Section 932.2(b) .

942.3CONSTRUCTION —Section 932.3 and as follows:

Remove existing signs, wood posts, foundations, and associated hardware as indicated. B ackfill any holes as specified in Section 206.3(b)4 . Stockpile signs for reuse. Dispose of existing associated hardware outside the right -of-way. If specified or indicated, store existing posts for Department pick up. Otherwise, d ispose of existing posts outside the right -of-way. Provide new treated wood posts, foundations, and/or associated hardware as directed to be set at the specified locations. Reset the existing signs. Avoid damage to existing signs during the removal and stockpiling operations . Replace any sign lost or damaged as a result of any of the resetting operations, at no additional cost to the Department.

942.4MEASUREMENT AND PAYMENT —Each

Source: Pennsylvania Department of Transportation Specifications, 2026 Edition. Pages 851855 of 1,522.