932POST MOUNTED SIGNS, TYPE C

932.1DESCRIPTION—This work is the furnishing and installation of flat sheet signs on wood posts .

932.2MATERIAL—As shown on the Standard Drawings and as follows:

• Flat Sheet Signs. Section 1103.04

• Treated Wood Posts. Section 1103.09

• Aluminum Bolts, Aluminum Nuts, and Lag Screws. Section 1103.11

• Shims and Bars. Section 1105.02(a)2

• Brackets. Section 1105.02(f)2

• Class A Cement Concrete. Section 704

• Sleeves. Section 1105.02(j)1

932.3CONSTRUCTION—As shown on the Standard Drawings, as specified in Sections 930.3(a), (b), (d),

and (e), Section 931.3(b), and as follows: Excavate for the post foundation. Place the post, with shim plates and bars attached, in the sleeve in the excavated foundation. Carefully set the sleeve, using the temporary framing to ensure proper location. Place foundation concrete, as specified in the applicable parts of Section 1001.3, against undisturbed earth. Finish the foundation tops flush and in the same plane as the adjacent ground, except trowel the concrete surface and shape to prevent water standing against the posts. Drill or form the hole if posts are to be located in concrete such as divisors or islands. Limit field cutting of posts to a minimum. Field treat the cut area with the original post preservative. Where multiple sign assemblies on the same installation require larger posts than shown on the Standard Drawings, refer to the Standard Drawings for post mounted signs, Type E. Permanently scribe 1-inch numerals on back of sign indicating the month and year of installation.

932.4MEASUREMENT AND PAYMENT—Square Foot of sign

The price includes removal of existing signs.