5-126 < 8 inches
518.52 Repair of Upward Facing Surfaces > 8 inches C u b i c Y a r d
518.60 Repair of Vertical Surfaces < 8 inches S q u a r e F o o t
518.61 Repair of Vertical Surfaces > 8 inches C u b i c Y a r d
518.70 Repair of Overhead Surfaces < 8 inches S q u a r e F o o t
518.71 Repair of Overhead Surfaces > 8 inches C u b i c Y a r d
SECTION 519 - EXPANSION DEVICES – ASPHALTIC PLUG JOINT
519.01 Description This work consists of furnishing and insta lling asphaltic plug joint
systems at the locations shown on the Plans, in accordance with these Specifications, and as directed by the Resident. This work shall include furnishing, i nstallation, and removal of all bond breaking materials used to prevent asphalt pavement layers from adhering to waterproofing membrane, all temporary header(s) installed with the intent to form the asphaltic plug joint channel, and all preparation required for the installation of the asphaltic plug joint. This work shall also include ha ving the approved manufacturer p rovide a qualified technical representative to supervise the installation of the j oint systems. The representative shall instruct, train, and supervise the Contractor’s personnel in the proper methods of installation. All costs associated with this service shall be i ncluded in the unit price of the work.
519.02 Submittals Prior to construction, the Contractor shall submit the following to
the Resident for review and approval:
a.Complete and detailed Shop Drawings of the asphaltic plug j oint system. Shop Drawings shall include information covering materials, their pr operties, installation procedures, storage and handling requirements, and Safety Data Sheets.
b.The resume of the manufacturer’s technical representative, which shall include the representative’s experience installing the asphaltic plug joint system along with the names and telephone numbers of contact persons for recent projects wh ere technical assistance was provided.
c.Certified test reports of the asphaltic binder, closed cell foam backer rod, and the plastic compound.
d.Certificates of Compliance for bridging plates, centering n ails, and aggregate.
519.03 Materials An asphaltic plug joint system from Departme nt’s Qualified Products
List for Expansion Devices – Non- Modular (Asphaltic Plug Joints ) shall be used.
Source: Maine Standard Specifications for Road and Bridge Construction, 2020 Edition. Pages 418–418 of 817.