B
HomeLibrariesCopilotSearchProjectsBookmarks
FeedbackHelp Desk
Libraries
Building Codes
Code LibraryIBC — BuildingIRC — ResidentialIFC — FireIPC — PlumbingIMC — MechanicalIFGC — Fuel GasIECC — EnergyNEC — ElectricalModel Codes
Specifications
CSI SpecificationsDOT SpecsTransit SpecsUSACE
Standards
TransportationRailroadFire SafetyAccessibilityStructural
Tools & References
DiagramsAssembliesProductsCalculatorsChecklistsPermits
PricingLog in
Electrical (16000-16999)

610.08Plain Riprap C u b i c Y a r d

ME · 2020 Standard SpecificationsBook pages 514514View official source ↗

6-44

610.11 Stone Blanket C u b i c Y a r d

610.16 Heavy Riprap C u b i c Y a r d

610.18 Stone Ditch Protection C u b i c Y a r d

SECTION 611 - Reserved SECTION 612 - BITUMINOUS SEALING

612.01 Description This work shall consist of sealing bitumin ous mix surfaces with

emulsified bituminous sealing compound of the specified color, applied at locations shown on the plans or designated.

612.02 Materials Bituminous material for sealing shall confor m to the requirements

of Emulsified Bituminous Sealing Compound, Section 702.12.

612.03 General The sealing compound shall be applied in two c oats. The first coat

shall be diluted by the addition of up to 50% water to a liquid consistency and applied with brooms or other approved methods at a rate of 0.25 gal to 0.50 gal of diluted sealer per square yard. The second coat shall be diluted only to the exte nt necessary to obtain workability and applied at a rate of 0.25 gal to 0.50 gal of di luted sealer per square yard.

612.04 Method of Measurement Bituminous sealing will be measu red by the square

yard of surface sealed measured parallel to the surface.

612.05 Basis of Payment The accepted quantities of bituminous sealing will be paid

for at the contract unit price pe r square yard complete in plac e. Pay Item Pay Unit

612.06 Bituminous Sealing-Black S q u a r e Y a r d

SECTION 613 - EROSION CONTROL BLANKETS

613.01 Description This work shall consist of furnishing and installing erosion

control blankets on previously prepared areas in accordance wit h the manufacturer instructions or as called for on the plans or otherwise authori zed. Erosion control blankets shall be installed on critical slopes, shoulder berms, esplanade strips, curb sections, in ditches and drainage ways, and other previously prepared areas or as shown.

Source: Maine Standard Specifications for Road and Bridge Construction, 2020 Edition. Pages 514514 of 817.