6-101 631.172 Truck-large (including operator) Hour
631.18 Chain Saw Rental (including operator Hour
631.20 Stump Chipper Rental (including operator) Hour
631.21 Road Broom (including operators and hauler) Hour
631.22 Front End Loader (including operator) Hour
631.221 Small Front End Loader (including operator) Hour
631.28 Brush Chipper (including operator) Hour
631.29 Rototiller (including operator) Hour
631.32 Culvert Cleaner (including operators) Hour
631.36 Foreman Hour
SECTION 632 and 633 - VACANT SECTION 634 - HIGHWAY LIGHTING
634.01 Description This work shall consist of furnishing and installing a highway
lighting system or modifying or removing an existing highway li ghting system, including the design of Light Standards, in accordance with these specifi cations and in reasonably close conformity with the plans.
634.02 General All material furnished by the Contractor shall be new unless otherwise
specified. Substitutes for specified material may be accepted, upon approval of the Fabrication Engineer. Substitutes shall provide equal or better service. Where an existing system is to be modified, the existing material shall be remove d, upgraded, or disposed of as shown on the plans or as directed. All electrical equipment shall c onform to NEMA, UL, or EIA stan dards, wherever applicable. In addition, all materials and workmanship shall c onform to the requirements of the NEC, the local electrical Utility Company, and all local or dinances, which may apply. 634.021 Materials Materials shall meet the requirements specif ied in the following Section of Division 700 - Materials: Steel Conduit 715.02 Non-metallic Conduit 715.03 Prewired Conduit 715.04 Metallic Junction and Fuse Box 715.05 Secondary Wiring 715.07 Luminaires, Lamps and Ballast 715.08 Luminaires, Lamp and Ballast for High Mast Lighting 715.09 Photo Electric Control 715.10 S e r v i c e E q u i p m e n t 715.11 Lowering System for High Mast Lighting 715.12 Aluminum Supports 720.01 Aluminum Mast Arm and Bracket Arm 720.02