Fabric Reinforced Elastomeric Art. 1028.01 SECTION 1026. CONCRETE SEALER
1026.01 General. Sealer types shall be according to the listing in
AASHTO M 224 and additional types will be considered for use. The sealer shall be listed on the Department’s qualified product list. The sealer shall have a clear or amber color when dry. The manufacturer shall provide an infrared spectrophotometer trace of the concrete sealer. The sealer will be tested by the Department according to Illinois Modified ASTM C 672. The average visual rating of the test specimens treated with sealer, divided by, the average visual rating of the untreated test specimens shall not exceed 0.80 after 60 cycles. In addition, the sealer shall not be debonded from the test specimens upon completion of testing. SECTION 1027. CHEMICAL ADHESIVE
1027.01 Chemical Adhesive Resin System. The chemical adhesive resin
system shall consist of a two part, fast-setting resin and filler/hardener. The system shall meet the requirements of the ITP for Chemical Adhesives and be on the Department’s qualified product list. SECTION 1028. FABRIC REINFORCED ELASTOMERIC
1028.01 Fabric Reinforced Elastomeric. Fabric reinforced elastomeric shall
consist of a fabric and an elastomer compound. The elastomer compound shall be either Polychloroprene according to Table X1 of AASHTO M 251 having a minimum Hardness (Durometer) of 50 or Ethylene Propylene Diene Monomer (EPDM) according to Article 1052.02. The composite of the fabric and elastomer compound shall have a minimum tensile strength of 700 x 700 lb/in. (122.6 x 122.6 N/mm) according to ASTM D 378. The minimum elongation at ultimate tensile strength shall be 30 percent according to ASTM D 412. The minimum thickness of the fabric reinforced elastomeric shall be 1/8 in. (3 mm).
Get an email when 1025 changes
Illinois revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.