B
HomeLibrariesCopilotSearchProjectsBookmarks
FeedbackHelp Desk
Libraries
Building Codes
Code LibraryIBC — BuildingIRC — ResidentialIFC — FireIPC — PlumbingIMC — MechanicalIFGC — Fuel GasIECC — EnergyNEC — ElectricalModel Codes
Specifications
CSI SpecificationsDOT SpecsTransit SpecsUSACE
Standards
TransportationRailroadFire SafetyAccessibilityStructural
Tools & References
DiagramsAssembliesProductsCalculatorsChecklistsPermits
PricingLog in
General

030104.03 — Temporary Raised Pavement Markers (RPMS)

MD · 2025 Standard SpecificationsBook pages 159159View official source ↗

2025 STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MATERIALS CATEGORY 100 PRELIMINARY SECTION 104.03 — TEMPORARY RAISED PAVEMENT MARKERS (RPMS)

104.03.01 Description

Furnish, install, and remove as necessary, temporary RPMs.

104.03.02 Materials

Temporary RPMs QPL

104.03.03 Construction

Install temporary RPMs, as specified in the Contract Documents and in accordance with the manufacturer's recommendations.

104.03.04 Measurement and Payment

The payment will be full compensation for all material, labor, equipment, tools, and incidentals necessary to complete the work. Increases or decreases in quantities will not be a basis for renegotiation of the Contract unit price.

a.Temporary Raised Pavement Markers will be measured and paid for at the Contract unit price per each.
b.Removal of Temporary Raised Pavement Markers will be measured and paid for at the Contract unit price per each.
c.Reimbursement will be made at the Contract unit price for each marker damaged by snowplow operations.

104.04 Temporary Concrete Traffic Barrier (Tcb) for Maintenance of Traffic

CATEGORY 100 PRELIMINARY SECTION 104.04 — TEMPORARY CONCRETE TRAFFIC BARRIER (TCB) FOR MAINTENANCE OF TRAFFIC

104.04.01 Description

Furnish, place, reset, and remove TCB.

104.04.02 Materials

Precast Concrete Traffic Barrier 950.01 Vertical Panels and Reflective Barrier Markers QPL TCB shall conform to NCHRP Report 350 and/or MASH 2016 criteria for Test Level 3.

104.04.03 Construction

Maintain TCB in alignment and in a like new condition. Remove and relocate TCBs as directed. Install reflective barrier markers and vertical panels (object markers) on the TCB as specified. Connections. In addition to the pin and loop connection shown on the Standards, the channel splice, vertical I beam, and lapped joint connections specified in the AASHTO Roadside Design Guide, and the proprietary T-Lok and J-J Hook Systems will be allowed provided only one type of joint connection is used for the length of the barrier.

104.04.04 Measurement and Payment

The payment will be full compensation for furnishing, placing, maintaining and removal from the project site as directed, and for all material, labor, equipment, tools, and incidentals necessary to complete the work.

a.Temporary Concrete Traffic Barrier for Maintenance of Traffic and Reset Temporary Concrete Traffic Barrier for Maintenance of Traffic will be measured and paid for at the Contract unit price per linear foot measured along the center line of the top of the barrier. 2025 STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MATERIALS
Source: Maryland Standard Specifications for Construction and Materials, 2025 Edition. Pages 159159 of 1,113.