CATEGORY 600 SHOULDERS SECTION 608 — WHEEL STOPS
608.01 Description
Furnish and install preformed wheel stops.
608.02 Materials
Portland Cement Concrete 902.10, Mix No. 2 Reinforcement Steel 908.01 Recycled Composite Material Wheel Stops As specified by the manufacturer Recycled Composite Material. Wheel stops manufactured of recycled composite material shall be as specified by the manufacturer and be insect resistant. The manufacturer shall furnish certification as specified in TC 1.03.
608.03 Construction
Locate and secure wheel stops in place as specified. Only one type of wheel stop is permitted for each project.
608.04 Measurement and Payment
Wheel Stops will be measured and paid for at the Contract unit price per each. The payment will be full compensation for all material, labor, equipment, tools, and incidentals necessary to complete the work. 2025 STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MATERIALS 609 — SHOULDER EDGE DROP OFF GRADING ADJUSTMENT CATEGORY 600 SHOULDERS SECTION 609 — SHOULDER EDGE DROP OFF GRADING ADJUSTMENT
609.01 Description
Construct the area adjacent to the outside edge of the shoulder to eliminate the shoulder edge drop off.
609.02 Materials
Refer to 605.02, 701.02, 705.02, 708.02, 709.02, and the following: Crusher Run Aggregate CR-6 901.01 Salvaged Topsoil 920.01.01 Furnished Topsoil 920.01.02 Asphalt Millings or Grindings Size of individual particles shall be less than 2 in. as determined visually.
609.03 Construction
When the outside edge of the shoulder is greater than 2-1/2 in. above the existing groundline, place a wedge of topsoil installed as specified in Section 701, or crusher run aggregate CR-6, or asphalt millings or grindings, in designated areas as specified or as directed. Grade the topsoil, or crusher run aggregate CR-6, or asphalt millings or grindings, to a slope of 4:1 or as directed. Compact the material as specified or as directed. Immediately after grading topsoil, perform either of the following as specified or as directed:
a.Perform Turfgrass Establishment as specified in Section 705 and immediately install Type A or Type E Soil Stabilization Matting as specified in Section 709.
b.Perform Turfgrass Sod Establishment as specified in Section 708. Complete the grading adjustment and install all materials by the end of the day that the drop off is created and prior to opening to traffic. The material, lines and grades, and the cross section shall be as specified. 2025 STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MATERIALS.
Source: Maryland Standard Specifications for Construction and Materials, 2025 Edition. Pages 782–782 of 1,113.