727000 CHAIN LINK FENCE LF

DE · 2025 Standard SpecificationsBook pages 425–426View official source ↗

FENCE SECTION 727 415 B. The Department will pay for repairing fence and gates at the contract lump sum price. Price and payment will constitute full compensation for:

1.Clearing and grading;

2.excavating and backfilling for footings;

3.providing and placing footing concrete;

4.removal and disposal of fencing and gate components and other debris generated by the repair

work; and

5.restoring disturbed areas to the original conditions.

ITEM DESCRIPTION UNIT 727000 CHAIN LINK FENCE LF 727001 RIGHT -OF-WAY FENCE LF 727002 WOOD POST AND RAIL FENCE LF 727003 VINYL POST AND RAIL FENCE LF 727004 WOOD VERTICAL SLAT FENCE LF 727005 DECORATIVE FENCE LF 727006 TEMPORARY CONSTRUCTION FENCE LF 727007 BRIDGE SAFETY FENCE, TYPE 1 LF 727008 BRIDGE SAFETY FENCE, TYPE 2 LF 727010 CHAIN LINK FENCE GATE EACH 727011 RIGHT -OF-WAY FENCE GATE EACH 727012 TEMPORARY CONSTRCUTION SAFETY FENCE GATE EACH 727013 DECORATIVE FENCE GATE EACH 727030 FENCE RELOCATION LF 727031 GATE RELOCATION EACH 727032 FENCE REPAIR LF 727033 GATE REPAIR EACH PAVEMENT MILLING AND RUMBLE STRIPS SECTION 760 416 SECTION 760 — PAVEMENT MILLING AND RUMBLE STRIPS

760.1Description.

This work consists of milling bituminous or PCC pavement and creating rumble strips.

760.2Materials.

Not applicable.

760.3Construction.

760.3.1 Pavement Milling.

A.Equip milling machine with guides to provide uniformity and consistency in alignment of each cut

with no tearing, snagging, or gouging of the resulting surface. Remove any imperfections exceeding 5/16 of an inch at any point along the surface. Open a mi lled surface to traffic only after removing all loose material. Provide temporary bituminous concrete wedges at any grade change of 2 inches or greater in accordance with the DE MUTCD.

B.Taper cuts consist of one pass between 6 - feet and 8 -feet with a specified depth at one edge and

zero depth at the other edge. 760.3.2 Rumble Strips.

A.Cut the rumble strips to dimensions in accordance with the contract or in accordance with the

Standard Construction Details without tearing or snagging.

B.Remove and dispose of millings.

760.4Method of Measurement.

A.The Department will measure the quantity of:

1.Pavement milling as the number of square yards per inch of depth. The Department will not

measure additional depth that the engineer did not provide written approval for milling.

2.Taper cut in square yards per inch.

3.Rumble strips longitudinally as the number of linear feet installed and accepted. The

Department will not measure the 12 -foot openings in bike -friendly rumble strips.

760.5Basis of Payment.

A.The Department will pay for pavement milling at the contract unit price per square yard per inch.

Price and payment will constitute full compensation for:

1.Pavement milling or planing;

2.cleanup of the bituminous concrete or PCC pavement residue wedge left from the milling

operation along the curb line, adjacent to speed humps, across intersecting streets, around manholes, and at the beginning and ending points of the milling operation; and

3.removing and disposing of milled material.

B.The Department will pay for rumble strips at the contract unit price per linear foot and accepted

in-place. Price and payment will constitute full compensation for:

Source: Delaware Standard Specifications for Road and Bridge Construction, 2025 Edition. Pages 425–426 of 779.

← Previous

72400 9 PERMANENT IMPACT ATTENUATOR, WIDE BAY, TYPE 3 EACH

72701 0 CHAIN LINK FENCE GATE EACH